Wrong length? Send it back within 30 days and we'll remake it with your plugs. You just cover shipping and any new parts.
Is this for you?
Yes if your pedal's jack says TRS, EXP, MIDI, AUX or stereo.
Not if you're linking normal mono pedals. That's a TS cable.
Splitting one TRS jack into two mono plugs? That's an insert cable.
"MIDI cable with a jack orientation that couldn't be found elsewhere." - Ray Bradley
TS vs TRS: do I need a TRS cable?
Look at the plug. One black ring is TS (tip, sleeve): mono guitar signal. Two black rings is TRS (tip, ring, sleeve): stereo, expression, MIDI or aux. If your pedal's jack is labelled TRS, EXP, MIDI, AUX or stereo, you need this cable.
Common uses: expression pedal · TRS MIDI · aux or tap switch · stereo pedal · 3.5mm headphone or MIDI port
A TRS cable connects specialty devices on your pedalboard. Things like expression pedals, MIDI devices, and even audio. The plug is the metal end that goes into the pedal and carries the signal from source to destination. Different plugs suit different pedal types and routing: some are better for tight spots, some for general use. Below is an easy-to-follow guide to picking the right one for your board.
Which plug should I pick?
If you're unsure, start with the Pancake. It's great for general use and most applications. Pick a different plug only as needed from there.
Look at where the cable comes out of each pedal (the plug sockets).
Measure from one socket to the next with a piece of string, looping the cable where possible (see the video above).
Loop your cable wherever possible and enter the length and plug type into the TRS cable designer above.
Still unsure? Email info@goodwoodaudio.com with your questions and we'll be happy to help.
Are soldered cables really that much better?
Soldered cables are the most reliable way to wire a pedalboard. The joints don't corrode or deteriorate over time, so you get a board you can actually rely on.
We use Mogami W2552 for every TRS cable. It's a robust, great-sounding balanced cable that carries your signal with minimal tone colouration. Touring pros use Mogami all over the world.
Patch Cable FAQ
How many do I need?
Wherever your board needs a TRS cable: expression pedals, MIDI splitters into TRS MIDI pedals, extension switches and more. It varies a lot from board to board depending on your gear and how you route things.
What length should I choose?
Measure jack to jack for each cable, and add about an inch if you're not looping. We recommend looping your cable. Watch the video further up the page to see how it's done and how it helps future-proof your pedalboard.
I can't solder, is that a problem?
No. These cables arrive soldered and ready to plug into your pedalboard. You just choose the plugs and length.
What's the difference between the plugs?
They're different shapes for different spaces. Pancake suits almost everything. See the guide above.
Do expression pedals need TRS?
Most do. The control signal rides on the ring, so a TS cable won't work. Check your pedal's manual if you're unsure.
Will this work for TRS MIDI type A and type B?
Yes. A TRS to TRS MIDI cable is wired straight through, so it works with both, as long as both devices use the same type. The type only matters when you convert to 5-pin DIN.
3.5mm or 1/4"?
Match the jack on your gear. 3.5mm shows up on headphone outs, some MIDI ports and certain noise gates.
What if I get a length wrong?
Every cable is built to your spec, so we can't resell it. If a length is off, send it back within 30 days and we'll remake it with your existing plugs, with no labour charge. You just cover shipping and any new parts it needs. Email info@goodwoodaudio.com first so we know it's coming.