Add a second level to your board. No tools needed.
$119.00 USD
Free US, CA & AU shipping over $149 · 2 year warranty
✓ No tools to adjust
✓ Fixed or hinged
✓ Extra strong: holds 200 lb
✓ Fits Temple, Pedaltrain & most boards
Is this for you?
Yes if your board is already full and you need to add more pedals. It works well with a looper or switcher, giving you more access to your back row. Use it to add pedals to the board you have, or shrink your board and keep the same pedals.
Not sure which size? Measure the total width of the pedals you need to add. LIFT's platform is 5" deep on every size.
More pedals, same board
LIFT adds a second level to your pedalboard. Put pedals on top and more underneath, so you can fit more on the board you have, or move to a smaller board with the same pedals.
Pick your size
12" LIFT
The original size. Great for adding 3 to 5 more pedals. 12" x 5" x 1" (30 x 12.7 x 2.5cm).
16" LIFT
Great for adding 4 to 6 more pedals. 16" x 5" x 1" (40.6 x 12.7 x 2.5cm).
21" LIFT
Fits 3 Strymon or Meris big boxes side by side, or adds 5 to 8 standard size pedals. 21" x 5" x 1" (53.3 x 12.7 x 2.5cm).
Measure first
Line up the pedals you want on top and measure their total width. The platform is 5" deep.
Works with Temple, Pedaltrain and Creation boards
LIFT works on most pedalboards, flat or angled. Mount it with Dual Lock, or bolt it straight to your board's frame. On Temple Audio boards, LIFT's mounting holes line up with the holes in the top of the board. On Pedaltrain boards, we recommend bolting it on. Creation boards work too. Not sure about yours? Email us and we'll check.
Specs
Lowest height
2.16" / 5.5cm (board to top of LIFT)
Highest height
4.25" / 10.8cm, using the included riser pieces
Height steps
6
Front and back lip
1" / 2.5cm
Platform
4mm thick. Holds 200 lb in the middle, on every size.
Stoppers (stop the platform tipping over the back when raised)
8x
M6 bolts
8x
M6 wing nuts
8x
M6 lock nuts
18x
Rubber washers
LIFT FAQ
How do I adjust the height?
No tools needed. LIFT uses wing nuts, rubber washers and bolts. Undo the wing nut, move the bolt to the height you want and tighten it back up. LIFT also comes with matching lock nuts. You'll need a tool to fit those, but they won't come loose over time.
Is LIFT hinged or fixed?
Both. You can run LIFT hinged or fixed at any height, and switch between them without tools. The manual shows how.
What heights can LIFT go to?
The lowest position is 2.16" (5.5cm) from the top of your pedalboard to the top of LIFT. It adjusts in 6 steps up to 4.25" (10.8cm) using the extra riser pieces, which are included. The lip on the front and back drops 1" (2.5cm).
Will LIFT bend if I step on it?
We made the platform 4mm thick, even after our manufacturer said it was overkill. If the pedals on it can take a stomp, LIFT can too.
What is a blem?
A blem has small cosmetic marks, like a light scratch or dent. It works exactly the same and has the same warranty and parts. Most customers can't find the mark when it arrives.
Can I bolt LIFT to my pedalboard?
Yes. Set LIFT up the way you'll use it and line it up on your board. Mark through the holes in the base with a pencil, then drill where you marked.
Which pedalboards does LIFT work with?
LIFT works on most pedalboards, flat or angled. Mount it with Dual Lock, or bolt it straight to your board's frame. On Temple Audio boards, LIFT's mounting holes line up with the holes in the top of the board. On Pedaltrain boards, we recommend bolting it on. Creation boards work too. Not sure about yours? Email info@goodwoodaudio.com and we'll check.
Which size fits a Strymon Timeline, BigSky and Mobius side by side?
The 21" LIFT. It was made for the big Strymon boxes. Meris big boxes fit side by side too: the Mercury X, LVX and Enzo X.